NVS Stu Kenson Twinzer 0-Degree Apex G10 Twin Fin Set-Small

From NVS

Longtime surfer/shaper Stu Kenson has cemented his place as one of San Diego's most talented and respected custom board builders over the course of the past 4-5 decades.

He started doing ding repair at the age of 13, and shaped his first board during the summer of 1971.

Stu Kenson has cultivated a dedicated, worldwide following and is know for his performance shortboards, big wave guns, longboards and various other alternative board designs (single, twin fish, twinzer and mid-length board).

Per Stu, these “pair with essentially all sizes and styles of Twinzer set ups; from performance longboards, mid-length eggs, fish boards and high performance shortboards.”

The Stu Kenson TWINS are a high performance upright template. Designed for his twinzer boards but can be used separately in any performance Twins and variety of other boards.

Twin

• Base: 4.54"
• Height: 5.08"
• Area: 17.20 in²
• Rake: 32.6°
• Foil: Flat
• Material: G10

Canard

• Base: 2.72"
• Height: 2.96"
• Area: 6.40 in²
• Rake: 34.3°
• Foil: Flat
• Material: G10

Cant angle for Futures based twins: 6.5 Degree

The Stu Kenson CANARD fins were designed to be paired with his Small Twin template but can be used in any setup calling for canards.

NOTE: If front canard fins use a 0-degree plug then select the 9-degree cant angle; if the plugs are 9-degree then select the 0-degree cant angle.